Two Available.  Grid Dish with mounting hardware. Available in SE Minnesota. Pick up only.
$300.00 each.

For 940-960 mhz…will not ship. It’s high gain, half parabolic. Two mounting brackets included. $700 or best offer

NEW, never installed. JAMPRO JMPC-2R DA 90.5fm Two-bay Medium Power Directional FM Antenna(s) system, the medium power version of the PENETRATOR antenna. Jampro says field trimming is not needed in most cases to achieve specs:
Max Input Power: 10 kW

System includes: JMPC-2R directional antennas factory tuned to 90.5fm, radomes, mounting brackets, hardware & directional parasitic reflectors (can be removed, reset. PRICE: $7600 buyer covers packing, shipping, handling and taxes.

I have a 4 panel Jampro circular pol channel 2 and the same thing on channel 6. The channel 2 system is in storage and the channel 6 one is still on the tower to be removed.

Location: California

Moseley DSP 6000 encoder/decoder pair. Make reasonable offer.

We recently replaced these consoles in our 5 studios; there are 4 24-channel Mosaic consoles and 1 30-channel Mosaic console. Each console frame has a Meter Bridge, monitor module, and a softkey module. The system includes two AE-IP Audio engine modules with redundant power supplies and a mixture of analog and digital sound card inputs. Also included are an extra engine frame and power supplies, audio cabling to connect the engines to StudioHub+ punch/patch bays, as well as the StudioHub+ patches.

Location: SW Ohio

1 each Audioarts D-75 12 channel console and power supply. The input cards are a mix of digital and analog. Will sell complete or individual parts. $500.00 complete. Must pick up. I might be able to meet you halfway. Will also part out. Call about individual parts needs.

5 each spare Audioarts D-75 digital input cards. $50.00 each

2 each spare Audioarts D-75 analog input cards. $50.00 each

Location: Greensboro NC

Shure SM7 Mics (3) – These mics are in good condition and work great. I have new windscreens for them that will be included.
$350 each or all three for $1000.

Location: Mena, AR

19″ Steel Rack Cabinets w/rear doors.   22″Dx22″Wx66.5″H
 Excellent Condition.   Contact via email

Location: Montana

Kintronic Laboratories RFC40-20-2 RF contactor. Excellent condition. No visible contact wear or signs of arcing. Was removed from parted out KTL phasor. It had been used very little as it transferred from main to backup AM transmitters. Photos available on request. Asking $200 plus shipping.

Location: Rapid City, SD

814 ft (measured with Anritsu Network Analyzer) RJ8-50 Heliax. Used on tower for a short time then warehouse stored with line under pressure.
Has two 6 bolt connectors. Network Analyzer shows no problems. 

Location: Texas

Wwe have updated our available items and they can be seen at this link.

https://bbn1.bbnradio.org/english/contact-us/surplus-equipment/

Location: MI and KS

Several tubes from the estate of an engineer who didn’t get the chance to retire. Please bid fair rebuild-able DUD price, as we have no way to test any of these. Many of these are pulled from working, but junked transmitters, and may have life left in them, but no guarantees, no returns.

Tube Number (Quantity)
3CX-3000A7 (3)
3CX-3000A7 – Purple Svetlana (1)
4CX-1000A (3)
4CX-5000A (5)
4CX-10000 (1)
4CX-15000 (1)
4CX-15000A (2)
4CX-15000A7 (1)
4CX-20000A/8990 (1)

Location: South Central Nebraska 

 PTek 500 Watt All Band RF Amp. This amp will make 250 Watts and works well. I have a RMA to send it for repair. Someone might want to repair it in the field so I will offer it here for a while at $1750. It is heavy so shipping would be high. If not too far from me I could meet buyer somewhere with it.

Location: Mena, AR

Need to rebuild a ATU? We got capacitors, let me know what you are interested in and I will work with you on pricing (based on amount you want). Check out, some of these are going for 4 figures on eBay.

Quantity MFG Type Capacity (mfd) PWV Current (amps) Freq (kHz)

11 CDM 293 0.0015 15000 16 1000
2 Sangamd 294 0.0016 25000 20 1000
3 CDM 294 0.001 30000 16 1000
2 CDM 294 0.00082 30000 15 1000
1 CDM 294 0.00075 30000 15 1000
1 CDM 292 0.0002 10000 43 1000
2 CDM 293 0.00075 20000 12 1000
1 Sangamd 293 0.00075 20000 12 1000
1 CDM 292 0.004 8000 18 1000
1 CDM 294 0.00051 30000 12 1000
4 CDM 294 0.00062 30000 13 1000
4 CDM 294 0.00056 30000 13 1000

Pics available on request. Email for more info, if you don’t hear back, text me on the phone since it might get caught in spam.

Location: New Bern, NC

Gorman-Redlich EAS-1, CAPDEC-1, 4channel (AM/FM/WX/FM)  – Version 9.9.31 – Removed from service January 1, 2025.

Location: Libby, Montana

Marti RPT-30 Transmitter and Marti CR-10 Receiver
 with removable rack mount, and Receiver.  Currently on 161.67 and 161.73.  New Condition.

Location: Libby, Montana

Vintage Gates ST-101 magnetic belt spot recorder: For just a few short years in the late 50’s and very early 60’s, this was the standard for tape playback of spots. 

I’m looking to either sell or donate to a museum. Condition is “complete, but unknown operationally”. It is heavy!

Location: Portland, OR

Quintech rack-mount, active “L”-Band splitter. 1-dish input with LNB Power Supply built in, 4-amplified outputs for satellite distribution. All in-out connectors are standard Type “F”.

I have 3 of these available. Asking $50 each, plus shipping. Take 1, 2, or all 3.

Location: South Central Nebraska 

Rivendell automation system computers loaded software in Dell model 10S was working when taken out of station last year , i have 7 of them 2 are new , will sale separate or for the lot of them , make offers

Location: North Carolina, Virginia, and DC

The device was purchased directly from Nautel in December 2019. It is model IPR-HDMC+STD HD Multicast audio, it was only used for a few days. $14,430 new, I can sell it to you for $8,000.

Location: Indiana

• Harris HT16HS transmitter. Used new from 1992 until 2017. Visual/Aural combiner and loads included. Was fully functioning when shutdown in 2017. Located in Southern Ontario, Canada.

            Offers?

• Prodelin Ku Satellite antenna, 1.8m offset, with heater and 4″ pole mount.

           Located in Southern Ontario, Canada.  Available for pickup ONLY.

           Offers?

Sold Radio Station. Satellite Dish & Receiver were in use until 4/30/25.

High Gain 10ft 3m Carbon Fiber Glass Fiberglass Antenna SMC Satellite Dish. Used but in Excellent Condition (Best Offer).

Brand NEW Norsat 3120F C-Band LNB & NEW DAWNCo C Bandpass Filter 4000-4200 MHz for 5G filter ($964.00). Still in Box.

Will help disassemble but you must come and get it here in Casper. I cannot ship it.

• new 3 1/8 elbow never used
• Two  (2):  3 1/18 hard line couplers new ever used

• OIB-1 Operating Impedance Bridge. Comes with a Calzone road case with handle & rf current meter. I’ll be glad to send photos $1200. or best offer
• Patomac FIM 21 Feild Strength Meter Real Good Cond. (I’ll be glad to send photos)

Location: Pittsburgh, PA

Contact: Phil Lenz    4129521930  |  pgholdies@gmail.com

7/10/25

Belar FM RF amp RFA-1  – Crystalled for 101.7
Belar Stereo Monitor FMS-2
Belar FM Modulation Monitor FMM-2
Belar AM Modulation Monitor AMM-3V Used on 1230.

Location: Montana

Contact: Duane Williams     406 607 1708 |  klcb@frontiernet.net

7/8/25

Potomac Instruments AA-51 Audio Analyser $200 plus shipping

Potomac Instruments AD-51 Audio Generator $200 plus shippping

$300 for both of them plus shipping

Both are in working order and haven’t been used in years.

A little TLC will have them in Like New condition real quick.

Location: Buffalo Grove, IL 

Contact: Dave Dybas  224-456-4953  |  dd92251@aol.com

11/3/24

A very lightly used Nautel V10 FM transmitter; always stored/operated in excellent environmental and temperature conditions, fastidiously maintained and given a full overhaul prior to releasing it for sale  now. It has never run at full power. 10kW TPO, solid state. 

This is a great transmitter, fully operational and can be demonstrated running into a dummy load. It comes with no exciter. Transmitter is now offline, and kept in a temperature controlled storage unit. Immediate easy ongrade access, and we will help you with loading it if needed. Sold as-is and where-is, ie shipping/packing is extra. We are 75 minutes SW of Houston. $15,000 

-Location: Bay City, TX

We’re ready to start looking for a home for our Continental 816. It’s a 2015 Steve Hasskamp rebuild, who set it up to run at around 8.7kW TPO. It’s currently tuned to 106.3 and the installed tube was making around 70%. Located in Abilene, Texas, can assist with loading. Building sits at approximately dock height. Last operated spring 2023. We’ll soon have an off site backup and realistically won’t ever use this again. It’s not right for it to sit unused.

I have a Decade MS-100 Mono FM Transmitter with balanced audio input and an Inovonics inomin1 223 processor. Purchased both during covid for a church parking lot service. Condition would be as new, $850

Gently used Z10CD 10KW transmitter, never run at full power. Only ever in service to create 6kw ERP for 90.5fm. It is the single phase power version, with a Harris Digital exciter. It has had regular maintenance performed on it, and is fault free. Good working order when taken from service as station moved to different tower site and power level. Asking $11,000 OBO and buyer covers additional costs of packing, shipping, insurance to deliver. Encourage buyer to pick up from site and transport the unit.

Axcera Solid State 500 watt TV Transmitter and MYAT Mask filter tuned to channel 17. Worked well when removed from service 4 years ago. Must pick up in Melville, NY. Asking $500

The Starlink 9003T1 is all-digital modular system for transmitting high-quality audio, voice and data connectivity to remote transmitter sites over T1 or E1 circuits.

Working, Nautel FM7 Transmitter at 101.5 or higher. Make an offer.

This Nicom TSL910 B 10W Composite Aural STL Transmitter and RSL900 B Receiver bundle comes with two 4-foot parabolic antennas and dielectric cable (with one N connector), making it ideal for those looking for a non-IP STL (Studio to Transmitter Link). This is everything you’ll need to get up and running fast. This bundle has never been used. The boxes have been opened only to take photos.Also Included in this Bundle:

Two BKP120 4 foot Parabolic Dish Antennas
LDF1-50 1/4 inch Foam Dialectric Cable with N connector 1 end.

• Installed new in 1993 and on 106.1 – used until we installed a new Gates Air. The plate blocker had a short before we installed the Gates Air. We found a beautiful donor plate blocker but decided not to use the HT20 due to room constraints. Main tube has 80 percent left. Spare tube needs rebuilt. $3500
• This transmitter – on 107.1 – was refurbished by OMB in Miami a few years ago and was used as a standy for one of our stations. Lately we cannot get both amps to balance for a full 5kw. We don’t understand this transmitter, so we are selling at a discount. Pictures are available. It is in very nice condition. Could be we don’t know how to balance both amps with the combiner. $3500.

BE 3.5 KW Transmitter in good working condition with extra rebuilt tube. FX 50 Exciter @ 100.9 FM – $2000
Also BE 500 FM Transmitter needs PA rebuild $2,000

Both worked until removed: CCA on 92.1, the B-E on 102.3. I have some spare parts and tubes. No exciters. The CCA is three-phase. They were $500 each… now free for the taking. I hate to scrap ’em but I need the space.